dmesg - first test
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.1.7-200.fc22.x86_64 (mockbuild@bkernel02.phx2.fedoraproject.org) (gcc version 5.1.1 20150618 (Red Hat 5.1.1-4) (GCC) ) #1 SMP Mon Sep 14 20:19:24 UTC 2015
Command line: BOOT_IMAGE=/vmlinuz-4.1.7-200.fc22.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.lvm.lv=fedora/root rhgb quiet LANG=en_US.UTF-8
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000008ec7bfff] usable
BIOS-e820: [mem 0x000000008ec7c000-0x000000008ec7cfff] ACPI NVS
BIOS-e820: [mem 0x000000008ec7d000-0x000000008ecc6fff] reserved
BIOS-e820: [mem 0x000000008ecc7000-0x000000008ed06fff] usable
BIOS-e820: [mem 0x000000008ed07000-0x000000008f39cfff] reserved
BIOS-e820: [mem 0x000000008f39d000-0x000000009507bfff] usable
BIOS-e820: [mem 0x000000009507c000-0x000000009656bfff] reserved
BIOS-e820: [mem 0x000000009656c000-0x00000000965a5fff] ACPI data
BIOS-e820: [mem 0x00000000965a6000-0x0000000096f01fff] ACPI NVS
BIOS-e820: [mem 0x0000000096f02000-0x0000000097ffefff] reserved
BIOS-e820: [mem 0x0000000097fff000-0x0000000097ffffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000004667fffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x8cb2e018-0x8cb4e657] usable ==> usable
e820: update [mem 0x8cc5d018-0x8cc62657] usable ==> usable
e820: update [mem 0x8cb10018-0x8cb2da57] usable ==> usable
e820: update [mem 0x8cafe018-0x8cb0f057] usable ==> usable
e820: update [mem 0x8caed018-0x8cafdc57] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x000000008caed017] usable
reserve setup_data: [mem 0x000000008caed018-0x000000008cafdc57] usable
reserve setup_data: [mem 0x000000008cafdc58-0x000000008cafe017] usable
reserve setup_data: [mem 0x000000008cafe018-0x000000008cb0f057] usable
reserve setup_data: [mem 0x000000008cb0f058-0x000000008cb10017] usable
reserve setup_data: [mem 0x000000008cb10018-0x000000008cb2da57] usable
reserve setup_data: [mem 0x000000008cb2da58-0x000000008cb2e017] usable
reserve setup_data: [mem 0x000000008cb2e018-0x000000008cb4e657] usable
reserve setup_data: [mem 0x000000008cb4e658-0x000000008cc5d017] usable
reserve setup_data: [mem 0x000000008cc5d018-0x000000008cc62657] usable
reserve setup_data: [mem 0x000000008cc62658-0x000000008ec7bfff] usable
reserve setup_data: [mem 0x000000008ec7c000-0x000000008ec7cfff] ACPI NVS
reserve setup_data: [mem 0x000000008ec7d000-0x000000008ecc6fff] reserved
reserve setup_data: [mem 0x000000008ecc7000-0x000000008ed06fff] usable
reserve setup_data: [mem 0x000000008ed07000-0x000000008f39cfff] reserved
reserve setup_data: [mem 0x000000008f39d000-0x000000009507bfff] usable
reserve setup_data: [mem 0x000000009507c000-0x000000009656bfff] reserved
reserve setup_data: [mem 0x000000009656c000-0x00000000965a5fff] ACPI data
reserve setup_data: [mem 0x00000000965a6000-0x0000000096f01fff] ACPI NVS
reserve setup_data: [mem 0x0000000096f02000-0x0000000097ffefff] reserved
reserve setup_data: [mem 0x0000000097fff000-0x0000000097ffffff] usable
reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x00000004667fffff] usable
efi: EFI v2.40 by American Megatrends
efi: ESRT=0x97edae18 ACPI=0x96577000 ACPI 2.0=0x96577000 SMBIOS=0xf05b0 SMBIOS 3.0=0x97ed8000 MPS=0xfcab0
esrt: Reserving ESRT space from 0000000097edae18 to 0000000097edae50.
SMBIOS 3.0.0 present.
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x466800 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00A0000000 mask 7FE0000000 uncachable
2 base 009C000000 mask 7FFC000000 uncachable
3 base 009A000000 mask 7FFE000000 uncachable
4 base 0099000000 mask 7FFF000000 uncachable
5 base 0098800000 mask 7FFF800000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
e820: last_pfn = 0x98000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcf40-0x000fcf4f] mapped at [ffff8800000fcf40]
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x02039000, 0x02039fff] PGTABLE
BRK [0x0203a000, 0x0203afff] PGTABLE
BRK [0x0203b000, 0x0203bfff] PGTABLE
init_memory_mapping: [mem 0x466600000-0x4667fffff]
[mem 0x466600000-0x4667fffff] page 2M
BRK [0x0203c000, 0x0203cfff] PGTABLE
init_memory_mapping: [mem 0x460000000-0x4665fffff]
[mem 0x460000000-0x4665fffff] page 2M
init_memory_mapping: [mem 0x440000000-0x45fffffff]
[mem 0x440000000-0x45fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x8ec7bfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0x8ebfffff] page 2M
[mem 0x8ec00000-0x8ec7bfff] page 4k
init_memory_mapping: [mem 0x8ecc7000-0x8ed06fff]
[mem 0x8ecc7000-0x8ed06fff] page 4k
init_memory_mapping: [mem 0x8f39d000-0x9507bfff]
[mem 0x8f39d000-0x8f3fffff] page 4k
[mem 0x8f400000-0x94ffffff] page 2M
[mem 0x95000000-0x9507bfff] page 4k
BRK [0x0203d000, 0x0203dfff] PGTABLE
BRK [0x0203e000, 0x0203efff] PGTABLE
init_memory_mapping: [mem 0x97fff000-0x97ffffff]
[mem 0x97fff000-0x97ffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x43fffffff]
[mem 0x100000000-0x43fffffff] page 1G
RAMDISK: [mem 0x3ed39000-0x3fffafff]
Secure boot enabled
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x0000000096577000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000965770A0 0000B4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000009659A698 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000965771E8 0234AD (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x0000000096F01F80 000040
ACPI: APIC 0x000000009659A7A8 0000BC (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000009659A868 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000009659A8B0 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000009659A950 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x000000009659A990 000038 (v01 ALASKA A M I 01072009 AMI. 0005000B)
ACPI: SSDT 0x000000009659A9C8 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: LPIT 0x000000009659AD38 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000009659ADD0 000248 (v02 INTEL sensrhub 00000000 INTL 20120913)
ACPI: SSDT 0x000000009659B018 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913)
ACPI: SSDT 0x000000009659DBC8 000C45 (v02 INTEL Ther_Rvp 00001000 INTL 20120913)
ACPI: DBGP 0x000000009659E810 000034 (v01 INTEL 00000000 MSFT 0000005F)
ACPI: DBG2 0x000000009659E848 000054 (v00 INTEL 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000009659E8A0 0006FD (v02 INTEL xh_rvp08 00000000 INTL 20120913)
ACPI: SSDT 0x000000009659EFA0 005271 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
ACPI: UEFI 0x00000000965A4218 000042 (v01 00000000 00000000)
ACPI: SSDT 0x00000000965A4260 000E58 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
ACPI: BGRT 0x00000000965A5110 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000004667fffff]
NODE_DATA(0) allocated [mem 0x4667e9000-0x4667fcfff]
[ffffea0000000000-ffffea00119fffff] PMD -> [ffff880455e00000-ffff880465dfffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000004667fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000008ec7bfff]
node 0: [mem 0x000000008ecc7000-0x000000008ed06fff]
node 0: [mem 0x000000008f39d000-0x000000009507bfff]
node 0: [mem 0x0000000097fff000-0x0000000097ffffff]
node 0: [mem 0x0000000100000000-0x00000004667fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000004667fffff]
On node 0 totalpages: 4174137
DMA zone: 64 pages used for memmap
DMA zone: 40 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 9447 pages used for memmap
DMA32 zone: 604572 pages, LIFO batch:31
Normal zone: 55712 pages used for memmap
Normal zone: 3565568 pages, LIFO batch:31
tboot: non-0 tboot_addr but it is not of type E820_RESERVED
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x8caed000-0x8caedfff]
PM: Registered nosave memory: [mem 0x8cafd000-0x8cafdfff]
PM: Registered nosave memory: [mem 0x8cafe000-0x8cafefff]
PM: Registered nosave memory: [mem 0x8cb0f000-0x8cb0ffff]
PM: Registered nosave memory: [mem 0x8cb10000-0x8cb10fff]
PM: Registered nosave memory: [mem 0x8cb2d000-0x8cb2dfff]
PM: Registered nosave memory: [mem 0x8cb2e000-0x8cb2efff]
PM: Registered nosave memory: [mem 0x8cb4e000-0x8cb4efff]
PM: Registered nosave memory: [mem 0x8cc5d000-0x8cc5dfff]
PM: Registered nosave memory: [mem 0x8cc62000-0x8cc62fff]
PM: Registered nosave memory: [mem 0x8ec7c000-0x8ec7cfff]
PM: Registered nosave memory: [mem 0x8ec7d000-0x8ecc6fff]
PM: Registered nosave memory: [mem 0x8ed07000-0x8f39cfff]
PM: Registered nosave memory: [mem 0x9507c000-0x9656bfff]
PM: Registered nosave memory: [mem 0x9656c000-0x965a5fff]
PM: Registered nosave memory: [mem 0x965a6000-0x96f01fff]
PM: Registered nosave memory: [mem 0x96f02000-0x97ffefff]
PM: Registered nosave memory: [mem 0x98000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x98000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:1024 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 34 pages/cpu @ffff880466400000 s101016 r8192 d30056 u262144
pcpu-alloc: s101016 r8192 d30056 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4108874
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-4.1.7-200.fc22.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.lvm.lv=fedora/root rhgb quiet LANG=en_US.UTF-8
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x1f, cntxt size 0x440 using standard form
Memory: 16206764K/16696548K available (7827K kernel code, 1242K rwdata, 3268K rodata, 1516K init, 1524K bss, 489784K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:65792 nr_irqs:2048 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 4006.223 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8012.44 BogoMIPS (lpj=4006223)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150410
ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20150410/dswload-210)
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20150410/psobject-224)
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 28K (ffffffff81eb3000 - ffffffff81eba000)
Ignoring BGRT: invalid status 0 (expected 1)
ftrace: allocating 28120 entries in 110 pages
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz (fam: 06, model: 5e, stepping: 03)
Performance Events: no PEBS fmt3+, generic architected perfmon, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (64099.56 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x8ec7c000-0x8ec7cfff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x965a6000-0x96f01fff] (9814016 bytes)
clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
RTC time: 10:03:51, date: 10/02/15
NET: Registered protocol family 16
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 21 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880453B03800 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880453AEA800 0007AA (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880453AEB000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880453BCD200 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x98800000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:01.1: [8086:1905] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdfc30000-0xdfc3ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdfc4d000-0xdfc4dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:2822] type 00 class 0x010400
pci 0000:00:17.0: reg 0x10: [mem 0xdfc48000-0xdfc49fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdfc4c000-0xdfc4c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:17.0: reg 0x24: [mem 0xdfc4b000-0xdfc4b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1b.0: [8086:a167] type 01 class 0x060400
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:a112] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:a114] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:a116] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:a145] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdfc44000-0xdfc47fff]
pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xdfc40000-0xdfc43fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdfc20000-0xdfc2ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.3: System wakeup disabled by ACPI
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdfc4a000-0xdfc4a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xdfc00000-0xdfc1ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: System wakeup disabled by ACPI
pci 0000:01:00.0: [10de:1287] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd8000000-0xd9ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [10de:0e0f] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xdf080000-0xdf083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
pci 0000:02:00.0: [8086:0953] type 00 class 0x010802
pci 0000:02:00.0: reg 0x10: [mem 0xdfb10000-0xdfb13fff 64bit]
pci 0000:02:00.0: reg 0x30: [mem 0xdfb00000-0xdfb0ffff pref]
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:01.1: bridge window [mem 0xdfb00000-0xdfbfffff]
acpiphp: Slot [1] registered
pci 0000:00:1b.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [1b21:1242] type 00 class 0x0c0330
pci 0000:04:00.0: reg 0x10: [mem 0xdfa00000-0xdfa07fff 64bit]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: bridge window [mem 0xdfa00000-0xdfafffff]
pci 0000:05:00.0: [1b21:1187] type 01 class 0x060400
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 05-0d]
pci 0000:00:1c.2: bridge window [io 0xc000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xdf200000-0xdf7fffff]
pci 0000:06:01.0: [1b21:1187] type 01 class 0x060400
pci 0000:06:01.0: PME# supported from D0 D3hot D3cold
pci 0000:06:02.0: [1b21:1187] type 01 class 0x060400
pci 0000:06:02.0: PME# supported from D0 D3hot D3cold
pci 0000:06:03.0: [1b21:1187] type 01 class 0x060400
pci 0000:06:03.0: PME# supported from D0 D3hot D3cold
pci 0000:06:04.0: [1b21:1187] type 01 class 0x060400
pci 0000:06:04.0: PME# supported from D0 D3hot D3cold
pci 0000:06:05.0: [1b21:1187] type 01 class 0x060400
pci 0000:06:05.0: PME# supported from D0 D3hot D3cold
pci 0000:06:06.0: [1b21:1187] type 01 class 0x060400
pci 0000:06:06.0: PME# supported from D0 D3hot D3cold
pci 0000:06:07.0: [1b21:1187] type 01 class 0x060400
pci 0000:06:07.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PCI bridge to [bus 06-0d]
pci 0000:05:00.0: bridge window [io 0xc000-0xdfff]
pci 0000:05:00.0: bridge window [mem 0xdf200000-0xdf7fffff]
pci 0000:06:01.0: PCI bridge to [bus 07]
pci 0000:08:00.0: [14e4:43a0] type 00 class 0x028000
pci 0000:08:00.0: reg 0x10: [mem 0xdf400000-0xdf407fff 64bit]
pci 0000:08:00.0: reg 0x18: [mem 0xdf200000-0xdf3fffff 64bit]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:02.0: PCI bridge to [bus 08]
pci 0000:06:02.0: bridge window [mem 0xdf200000-0xdf4fffff]
pci 0000:09:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:09:00.0: reg 0x10: [io 0xd050-0xd057]
pci 0000:09:00.0: reg 0x14: [io 0xd040-0xd043]
pci 0000:09:00.0: reg 0x18: [io 0xd030-0xd037]
pci 0000:09:00.0: reg 0x1c: [io 0xd020-0xd023]
pci 0000:09:00.0: reg 0x20: [io 0xd000-0xd01f]
pci 0000:09:00.0: reg 0x24: [mem 0xdf700000-0xdf7001ff]
pci 0000:06:03.0: PCI bridge to [bus 09]
pci 0000:06:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:06:03.0: bridge window [mem 0xdf700000-0xdf7fffff]
pci 0000:06:04.0: PCI bridge to [bus 0a]
pci 0000:06:05.0: PCI bridge to [bus 0b]
pci 0000:0c:00.0: [8086:1539] type 00 class 0x020000
pci 0000:0c:00.0: reg 0x10: [mem 0xdf600000-0xdf61ffff]
pci 0000:0c:00.0: reg 0x18: [io 0xc000-0xc01f]
pci 0000:0c:00.0: reg 0x1c: [mem 0xdf620000-0xdf623fff]
pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:06.0: PCI bridge to [bus 0c]
pci 0000:06:06.0: bridge window [io 0xc000-0xcfff]
pci 0000:06:06.0: bridge window [mem 0xdf600000-0xdf6fffff]
pci 0000:06:07.0: PCI bridge to [bus 0d]
pci 0000:0e:00.0: [1b21:1242] type 00 class 0x0c0330
pci 0000:0e:00.0: reg 0x10: [mem 0xdf900000-0xdf907fff 64bit]
pci 0000:0e:00.0: PME# supported from D3hot D3cold
pci 0000:0e:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 0e]
pci 0000:00:1c.4: bridge window [mem 0xdf900000-0xdf9fffff]
pci 0000:0f:00.0: [1b21:1242] type 00 class 0x0c0330
pci 0000:0f:00.0: reg 0x10: [mem 0xdf800000-0xdf807fff 64bit]
pci 0000:0f:00.0: PME# supported from D3hot D3cold
pci 0000:0f:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.6: PCI bridge to [bus 0f]
pci 0000:00:1c.6: bridge window [mem 0xdf800000-0xdf8fffff]
acpiphp: Slot [1-1] registered
pci 0000:00:1d.0: PCI bridge to [bus 10]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15)
ACPI: Enabled 6 GPEs in block 00 to 7F
ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x8caed018-0x8fffffff]
e820: reserve RAM buffer [mem 0x8cafe018-0x8fffffff]
e820: reserve RAM buffer [mem 0x8cb10018-0x8fffffff]
e820: reserve RAM buffer [mem 0x8cb2e018-0x8fffffff]
e820: reserve RAM buffer [mem 0x8cc5d018-0x8fffffff]
e820: reserve RAM buffer [mem 0x8ec7c000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8ed07000-0x8fffffff]
e820: reserve RAM buffer [mem 0x9507c000-0x97ffffff]
e820: reserve RAM buffer [mem 0x466800000-0x467ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1800-0x18fe] could not be reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0800-0x087f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x1854-0x1857] has been reserved
system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0xdffc0000-0xdffdffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1b.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
pci 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 10] add_size 1000
pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 10] add_size 200000 add_align 100000
pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 10] add_size 200000 add_align 100000
pci 0000:00:1b.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1b.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1b.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1b.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1d.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1d.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1d.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1d.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1b.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1b.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1d.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1d.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1b.0: BAR 14: assigned [mem 0x98800000-0x989fffff]
pci 0000:00:1b.0: BAR 15: assigned [mem 0x98a00000-0x98bfffff 64bit pref]
pci 0000:00:1d.0: BAR 14: assigned [mem 0x98c00000-0x98dfffff]
pci 0000:00:1d.0: BAR 15: assigned [mem 0x98e00000-0x98ffffff 64bit pref]
pci 0000:00:1b.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1d.0: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:01.1: bridge window [mem 0xdfb00000-0xdfbfffff]
pci 0000:00:1b.0: PCI bridge to [bus 03]
pci 0000:00:1b.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1b.0: bridge window [mem 0x98800000-0x989fffff]
pci 0000:00:1b.0: bridge window [mem 0x98a00000-0x98bfffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: bridge window [mem 0xdfa00000-0xdfafffff]
pci 0000:06:01.0: PCI bridge to [bus 07]
pci 0000:06:02.0: PCI bridge to [bus 08]
pci 0000:06:02.0: bridge window [mem 0xdf200000-0xdf4fffff]
pci 0000:06:03.0: PCI bridge to [bus 09]
pci 0000:06:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:06:03.0: bridge window [mem 0xdf700000-0xdf7fffff]
pci 0000:06:04.0: PCI bridge to [bus 0a]
pci 0000:06:05.0: PCI bridge to [bus 0b]
pci 0000:06:06.0: PCI bridge to [bus 0c]
pci 0000:06:06.0: bridge window [io 0xc000-0xcfff]
pci 0000:06:06.0: bridge window [mem 0xdf600000-0xdf6fffff]
pci 0000:06:07.0: PCI bridge to [bus 0d]
pci 0000:05:00.0: PCI bridge to [bus 06-0d]
pci 0000:05:00.0: bridge window [io 0xc000-0xdfff]
pci 0000:05:00.0: bridge window [mem 0xdf200000-0xdf7fffff]
pci 0000:00:1c.2: PCI bridge to [bus 05-0d]
pci 0000:00:1c.2: bridge window [io 0xc000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xdf200000-0xdf7fffff]
pci 0000:00:1c.4: PCI bridge to [bus 0e]
pci 0000:00:1c.4: bridge window [mem 0xdf900000-0xdf9fffff]
pci 0000:00:1c.6: PCI bridge to [bus 0f]
pci 0000:00:1c.6: bridge window [mem 0xdf800000-0xdf8fffff]
pci 0000:00:1d.0: PCI bridge to [bus 10]
pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1d.0: bridge window [mem 0x98c00000-0x98dfffff]
pci 0000:00:1d.0: bridge window [mem 0x98e00000-0x98ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x98800000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd9ffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xdfb00000-0xdfbfffff]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0x98800000-0x989fffff]
pci_bus 0000:03: resource 2 [mem 0x98a00000-0x98bfffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xdfa00000-0xdfafffff]
pci_bus 0000:05: resource 0 [io 0xc000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xdf200000-0xdf7fffff]
pci_bus 0000:06: resource 0 [io 0xc000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xdf200000-0xdf7fffff]
pci_bus 0000:08: resource 1 [mem 0xdf200000-0xdf4fffff]
pci_bus 0000:09: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:09: resource 1 [mem 0xdf700000-0xdf7fffff]
pci_bus 0000:0c: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:0c: resource 1 [mem 0xdf600000-0xdf6fffff]
pci_bus 0000:0e: resource 1 [mem 0xdf900000-0xdf9fffff]
pci_bus 0000:0f: resource 1 [mem 0xdf800000-0xdf8fffff]
pci_bus 0000:10: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:10: resource 1 [mem 0x98c00000-0x98dfffff]
pci_bus 0000:10: resource 2 [mem 0x98e00000-0x98ffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 19208K (ffff88003ed39000 - ffff88003fffb000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x88aed000-0x8caed000] (64MB) mapped at [ffff880088aed000-ffff88008caecfff]
microcode: CPU0 sig=0x506e3, pf=0x2, revision=0x23
microcode: CPU1 sig=0x506e3, pf=0x2, revision=0x23
microcode: CPU2 sig=0x506e3, pf=0x2, revision=0x23
microcode: CPU3 sig=0x506e3, pf=0x2, revision=0x23
microcode: CPU4 sig=0x506e3, pf=0x2, revision=0x23
microcode: CPU5 sig=0x506e3, pf=0x2, revision=0x23
microcode: CPU6 sig=0x506e3, pf=0x2, revision=0x23
microcode: CPU7 sig=0x506e3, pf=0x2, revision=0x23
microcode: Microcode Update Driver: v2.00 , Peter Oruba
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1443780231.417:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Key type big_key registered
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xd9000000, mapped to 0xffffc90002000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: does not run on family 6 model 94
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: controller can't do SNTF, turning off CAP_SNTF
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl RAID mode
ahci 0000:00:17.0: flags: 64bit ncq led clo only pio slum part ems deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xdfc4b000 port 0xdfc4b100 irq 130
ata2: SATA max UDMA/133 abar m2048@0xdfc4b000 port 0xdfc4b180 irq 130
ata3: SATA max UDMA/133 abar m2048@0xdfc4b000 port 0xdfc4b200 irq 130
ata4: SATA max UDMA/133 abar m2048@0xdfc4b000 port 0xdfc4b280 irq 130
ata5: SATA max UDMA/133 abar m2048@0xdfc4b000 port 0xdfc4b300 irq 130
ata6: SATA max UDMA/133 abar m2048@0xdfc4b000 port 0xdfc4b380 irq 130
ahci 0000:09:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:09:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:09:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc
scsi host6: ahci
scsi host7: ahci
ata7: SATA max UDMA/133 abar m512@0xdf700000 port 0xdf700100 irq 17
ata8: SATA max UDMA/133 abar m512@0xdf700000 port 0xdf700180 irq 17
libphy: Fixed MDIO Bus: probed
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.1.7-200.fc22.x86_64 xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
ACPI Error: No object attached to node [UHSD] ffff88045590b5f0 (20150410/exresnte-128)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.XHC_.RHUB.HS01._PLD] (Node ffff88045590b640), AE_AML_NO_OPERAND (20150410/psparse-536)
ACPI Error: No object attached to node [UHSD] ffff88045590b5f0 (20150410/exresnte-128)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.XHC_.RHUB.HS02._PLD] (Node ffff88045590b690), AE_AML_NO_OPERAND (20150410/psparse-536)
ACPI Error: No object attached to node [UHSD] ffff88045590b5f0 (20150410/exresnte-128)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.XHC_.RHUB.HS03._PLD] (Node ffff88045590b6e0), AE_AML_NO_OPERAND (20150410/psparse-536)
ACPI Error: No object attached to node [UHSD] ffff88045590b5f0 (20150410/exresnte-128)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.XHC_.RHUB.HS04._PLD] (Node ffff88045590b730), AE_AML_NO_OPERAND (20150410/psparse-536)
ACPI Error: No object attached to node [UHSD] ffff88045590b5f0 (20150410/exresnte-128)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.XHC_.RHUB.HS05._PLD] (Node ffff88045590b780), AE_AML_NO_OPERAND (20150410/psparse-536)
ACPI Error: No object attached to node [UHSD] ffff88045590b5f0 (20150410/exresnte-128)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.XHC_.RHUB.HS06._PLD] (Node ffff88045590b7d0), AE_AML_NO_OPERAND (20150410/psparse-536)
ACPI Error: No object attached to node [UHSD] ffff88045590b5f0 (20150410/exresnte-128)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.XHC_.RHUB.HS07._PLD] (Node ffff88045590b820), AE_AML_NO_OPERAND (20150410/psparse-536)
ACPI Error: No object attached to node [UHSD] ffff88045590b5f0 (20150410/exresnte-128)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.XHC_.RHUB.HS08._PLD] (Node ffff88045590b870), AE_AML_NO_OPERAND (20150410/psparse-536)
ACPI Error: No object attached to node [UHSD] ffff88045590b5f0 (20150410/exresnte-128)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.XHC_.RHUB.HS09._PLD] (Node ffff88045590b8c0), AE_AML_NO_OPERAND (20150410/psparse-536)
ACPI Error: No object attached to node [UHSD] ffff88045590b5f0 (20150410/exresnte-128)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.XHC_.RHUB.HS10._PLD] (Node ffff88045590b910), AE_AML_NO_OPERAND (20150410/psparse-536)
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.1.7-200.fc22.x86_64 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:04:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.1.7-200.fc22.x86_64 xhci-hcd
usb usb3: SerialNumber: 0000:04:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.1.7-200.fc22.x86_64 xhci-hcd
usb usb4: SerialNumber: 0000:04:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:0e:00.0: xHCI Host Controller
xhci_hcd 0000:0e:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:0e:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.1.7-200.fc22.x86_64 xhci-hcd
usb usb5: SerialNumber: 0000:0e:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:0e:00.0: xHCI Host Controller
xhci_hcd 0000:0e:00.0: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.1.7-200.fc22.x86_64 xhci-hcd
usb usb6: SerialNumber: 0000:0e:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:0f:00.0: xHCI Host Controller
xhci_hcd 0000:0f:00.0: new USB bus registered, assigned bus number 7
xhci_hcd 0000:0f:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 4.1.7-200.fc22.x86_64 xhci-hcd
usb usb7: SerialNumber: 0000:0f:00.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xhci_hcd 0000:0f:00.0: xHCI Host Controller
xhci_hcd 0000:0f:00.0: new USB bus registered, assigned bus number 8
usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 4.1.7-200.fc22.x86_64 xhci-hcd
usb usb8: SerialNumber: 0000:0f:00.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
Initializing XFRM netlink socket
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: 958357fa981e3c18fa6718ca68ca3b7b1f3dd726'
EFI: Loaded cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2' linked to '.system_keyring'
EFI: Loaded cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071' linked to '.system_keyring'
EFI: Loaded cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to '.system_keyring'
EFI: Loaded cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to '.system_keyring'
EFI: Loaded cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to '.system_keyring'
EFI: Loaded cert 'Fedora Secure Boot CA: fde32599c2d61db1bf5807335d7b20e4cd963b42' linked to '.system_keyring'
registered taskstats version 1
Magic number: 3:745:71
memory memory99: hash matches
rtc_cmos 00:03: setting system clock to 2015-10-02 10:03:51 UTC (1443780231)
ata2: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata1: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
usb 1-7: new full-speed USB device number 2 using xhci_hcd
usb 7-1: new high-speed USB device number 2 using xhci_hcd
usb 1-7: New USB device found, idVendor=0b05, idProduct=180a
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-7: Product: BCM20702A0
usb 1-7: Manufacturer: Broadcom Corp
usb 1-7: SerialNumber: 28C2DDDE91CB
ata8: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 1516K (ffffffff81d38000 - ffffffff81eb3000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 352K (ffff8800017a8000 - ffff880001800000)
Freeing unused kernel memory: 828K (ffff880001b31000 - ffff880001c00000)
random: systemd urandom read with 7 bits of entropy available
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Created slice -.slice.
systemd[1]: Starting -.slice.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Starting Journal Audit Socket.
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Local File Systems.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Sockets.
systemd[1]: Reached target Timers.
systemd[1]: Starting Timers.
systemd[1]: Started dracut ask for additional cmdline parameters.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Starting Journal Service...
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Create list of required static device nodes for the current kernel.
audit: type=1130 audit(1443780231.936:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Create Static Device Nodes in /dev.
audit: type=1130 audit(1443780231.940:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Started Setup Virtual Console.
audit: type=1130 audit(1443780231.966:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Started Journal Service.
audit: type=1130 audit(1443780231.985:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1443780231.996:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
usb 7-1: New USB device found, idVendor=0409, idProduct=005a
usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 7-1:1.0: USB hub found
hub 7-1:1.0: 4 ports detected
audit: type=1130 audit(1443780232.011:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1443780232.013:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1443780232.022:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1443780232.038:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
wmi: Mapper loaded
dca service started, version 1.12.1
[drm] Initialized drm 1.1.0 20060810
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
igb: Copyright (c) 2007-2014 Intel Corporation.
pps pps0: new PPS source ptp0
igb 0000:0c:00.0: added PHC on eth0
igb 0000:0c:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:0c:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 30:5a:3a:df:bf:ee
igb 0000:0c:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:0c:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
igb 0000:0c:00.0 enp12s0: renamed from eth0
MXM: GUID detected in BIOS
checking generic (d9000000 300000) vs hw (d0000000 8000000)
checking generic (d9000000 300000) vs hw (d8000000 2000000)
fb: switching to nouveaufb from EFI VGA
Console: switching to colour dummy device 80x25
nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0xb06070b1
nouveau [ DEVICE][0000:01:00.0] Chipset: GK208B (NV106)
nouveau [ DEVICE][0000:01:00.0] Family : NVE0
8021q: 802.1Q VLAN Support v1.8
usb 7-2: new high-speed USB device number 3 using xhci_hcd
tsc: Refined TSC clocksource calibration: 4007.998 MHz
clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x39c5e079383, max_idle_ns: 440795359885 ns
nouveau [ VBIOS][0000:01:00.0] using image from PROM
nouveau [ VBIOS][0000:01:00.0] BIT signature found
nouveau [ VBIOS][0000:01:00.0] version 80.28.79.00.0b
nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
nouveau [ PFB][0000:01:00.0] RAM type: DDR3
nouveau [ PFB][0000:01:00.0] RAM size: 2048 MiB
nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
nouveau [ VOLT][0000:01:00.0] GPU voltage: 912500uv
usb 7-2: New USB device found, idVendor=03f0, idProduct=2514
usb 7-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 7-2:1.0: USB hub found
hub 7-2:1.0: 4 ports detected
usb 7-1.1: new low-speed USB device number 4 using xhci_hcd
usb 7-1.1: New USB device found, idVendor=046a, idProduct=0001
usb 7-1.1: New USB device strings: Mfr=1, Product=0, SerialNumber=0
usb 7-1.1: Manufacturer: Cherry GmbH
usb 7-1.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Cherry GmbH as /devices/pci0000:00/0000:00:1c.6/0000:0f:00.0/usb7/7-1/7-1.1/7-1.1:1.0/0003:046A:0001.0001/input/input6
hid-generic 0003:046A:0001.0001: input,hidraw0: USB HID v1.11 Keyboard [Cherry GmbH] on usb-0000:0f:00.0-1.1/input0
usb 7-2.4: new low-speed USB device number 5 using xhci_hcd
usb 7-2.4: New USB device found, idVendor=046d, idProduct=c077
usb 7-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2.4: Product: USB Optical Mouse
usb 7-2.4: Manufacturer: Logitech
usb 7-2.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1c.6/0000:0f:00.0/usb7/7-2/7-2.4/7-2.4:1.0/0003:046D:C077.0002/input/input7
hid-generic 0003:046D:C077.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:0f:00.0-2.4/input0
nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
nouveau [ PTHERM][0000:01:00.0] fan management: automatic
nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
nouveau [ CLK][0000:01:00.0] 07: core 405 MHz memory 810 MHz
nouveau [ CLK][0000:01:00.0] 0f: core 653-901 MHz memory 1800 MHz
nouveau [ CLK][0000:01:00.0] --: core 405 MHz memory 810 MHz
[TTM] Zone kernel: Available graphics memory: 8176244 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 2048 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 01000f02 00020030
nouveau [ DRM] DCB outp 01: 02011f62 00020010
nouveau [ DRM] DCB outp 02: 02022f10 00000000
nouveau [ DRM] DCB conn 00: 00001031
nouveau [ DRM] DCB conn 01: 00002161
nouveau [ DRM] DCB conn 02: 00000200
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau [ DRM] MM: using COPY for buffer copies
nouveau [ DRM] allocated 1920x1200 fb: 0x60000, bo ffff88003fa33400
fbcon: nouveaufb (fb0) is primary device
Switched to clocksource tsc
Console: switching to colour frame buffer device 240x75
nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:01:00.0: registered panic notifier
[drm] Initialized nouveau 1.2.2 20120801 for 0000:01:00.0 on minor 0
nvme0n1: p1 p2 p3
audit_printk_skb: 3 callbacks suppressed
audit: type=1130 audit(1443780237.014:12): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1443780237.017:13): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1130 audit(1443780237.046:14): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1443780237.046:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1443780237.162:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1443780237.165:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1443780237.165:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1443780237.165:19): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1443780237.165:20): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1443780237.165:21): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd-journald[185]: Received SIGTERM from PID 1 (systemd).
SELinux: 32768 avtab hash slots, 106790 rules.
SELinux: 32768 avtab hash slots, 106790 rules.
SELinux: 8 users, 105 roles, 4977 types, 303 bools, 1 sens, 1024 cats
SELinux: 92 classes, 106790 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
systemd[1]: Successfully loaded SELinux policy in 46.749ms.
systemd[1]: Relabelled /dev and /run in 9.343ms.
EXT4-fs (dm-1): re-mounted. Opts: (null)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
random: nonblocking pool is initialized
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
systemd-journald[622]: Received request to flush runtime journal from PID 1
ACPI Warning: SystemIO range 0x000000000000F000-0x000000000000F01F conflicts with OpRegion 0x000000000000F000-0x000000000000F00F (\_SB_.PCI0.SBUS.SMBI) (20150410/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
bcma-pci-bridge 0000:08:00.0: enabling device (0000 -> 0002)
bcma: bus0: Found chip with id 0x4360, rev 0x03 and package 0x00
bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2B, class 0x0)
bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x2A, class 0x0)
bcma: bus0: Core 2 found: ARM CR4 (manuf 0x4BF, id 0x83E, rev 0x02, class 0x0)
bcma: bus0: Core 3 found: PCIe Gen2 (manuf 0x4BF, id 0x83C, rev 0x01, class 0x0)
bcma: bus0: Core 4 found: USB 2.0 Device (manuf 0x4BF, id 0x81A, rev 0x11, class 0x0)
bcma: bus0: Using fallback SPROM failed (err -2)
bcma: bus0: No SPROM available
bcma: bus0: Bus registered
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
alg: No test for crc32 (crc32-pclmul)
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input8
EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
Adding 8191996k swap on /dev/mapper/fedora-swap. Priority:-1 extents:1 across:8191996k SSFS
asus_wmi: Disabling ACPI video driver
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Bluetooth: hci0: BCM: chip id 63
cfg80211: Calling CRDA to update world regulatory domain
Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0b05-180a.hcd failed with error -2
Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0b05-180a.hcd not found
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
b43-phy0: Broadcom 4360 WLAN found (core revision 42)
bcma: bus0: HT force timeout
bcma: bus0: PLL enable timeout
b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 12, Type 11 (AC), Revision 1)
b43: probe of bcma0:1 failed with error -95
Broadcom 43xx driver loaded [ Features: PMNLS ]
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
e1000e 0000:00:1f.6 eth0: registered PHC clock
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 30:5a:3a:df:bf:ed
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
snd_hda_intel 0000:00:1f.3: failed to add i915 component master (-19)
snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp12s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp12s0: link is not ready
8021q: adding VLAN 0 to HW filter on device enp12s0
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
Adjusting tsc more than 11% (4710201 vs 4646386)
fuse init (API version 7.23)
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
usb 7-2.4: USB disconnect, device number 5
usb 7-2.4: new low-speed USB device number 6 using xhci_hcd
usb 7-2.4: New USB device found, idVendor=046d, idProduct=c077
usb 7-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2.4: Product: USB Optical Mouse
usb 7-2.4: Manufacturer: Logitech
usb 7-2.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1c.6/0000:0f:00.0/usb7/7-2/7-2.4/7-2.4:1.0/0003:046D:C077.0003/input/input19
hid-generic 0003:046D:C077.0003: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:0f:00.0-2.4/input0
usb 7-2.4: USB disconnect, device number 6
usb 7-2.3: new full-speed USB device number 7 using xhci_hcd
usb 7-2.3: New USB device found, idVendor=046d, idProduct=c52b
usb 7-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2.3: Product: USB Receiver
usb 7-2.3: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:0f:00.0-2.3/input2
input: Logitech MX Master as /devices/pci0000:00/0000:00:1c.6/0000:0f:00.0/usb7/7-2/7-2.3/7-2.3:1.2/0003:046D:C52B.0006/0003:046D:4041.0007/input/input20
logitech-hidpp-device 0003:046D:4041.0007: input,hidraw2: USB HID v1.11 Keyboard [Logitech MX Master] on usb-0000:0f:00.0-2.3:1
usb 7-2.3: USB disconnect, device number 7
usb 1-13: new full-speed USB device number 3 using xhci_hcd
usb 1-13: New USB device found, idVendor=046d, idProduct=c52b
usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-13: Product: USB Receiver
usb 1-13: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.000A: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-13/input2
input: Logitech MX Master as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.2/0003:046D:C52B.000A/0003:046D:4041.000B/input/input21
logitech-hidpp-device 0003:046D:4041.000B: input,hidraw2: USB HID v1.11 Keyboard [Logitech MX Master] on usb-0000:00:14.0-13:1
e1000e: enp0s31f6 NIC Link is Down
usb 1-13: USB disconnect, device number 3
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
nouveau [ DRM] suspending console...
nouveau [ DRM] suspending display...
e1000e: EEE TX LPI TIMER: 00000011
nouveau [ DRM] evicting buffers...
pcieport 0000:05:00.0: System wakeup enabled by ACPI
nouveau [ DRM] waiting for kernel channels to go idle...
nouveau [ DRM] suspending client object trees...
nouveau [ DRM] suspending kernel object tree...
PM: suspend of devices complete after 1957.872 msecs
PM: late suspend of devices complete after 0.243 msecs
xhci_hcd 0000:0f:00.0: System wakeup enabled by ACPI
xhci_hcd 0000:0e:00.0: System wakeup enabled by ACPI
xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 11.995 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
kvm: enabling virtualization on CPU1
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
kvm: enabling virtualization on CPU2
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
kvm: enabling virtualization on CPU3
cache: parent cpu3 should not be sleeping
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
kvm: enabling virtualization on CPU4
cache: parent cpu4 should not be sleeping
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
kvm: enabling virtualization on CPU5
cache: parent cpu5 should not be sleeping
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
kvm: enabling virtualization on CPU6
cache: parent cpu6 should not be sleeping
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
cache: parent cpu7 should not be sleeping
CPU7 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI
xhci_hcd 0000:0f:00.0: System wakeup disabled by ACPI
xhci_hcd 0000:0e:00.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 12.246 msecs
PM: early resume of devices complete after 0.179 msecs
nouveau [ DRM] re-enabling device...
nouveau [ DRM] resuming kernel object tree...
nouveau [ VBIOS][0000:01:00.0] running init tables
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
rtc_cmos 00:03: System wakeup disabled by ACPI
pcieport 0000:05:00.0: System wakeup disabled by ACPI
usb usb5: root hub lost power or was reset
usb usb6: root hub lost power or was reset
usb usb7: root hub lost power or was reset
usb usb8: root hub lost power or was reset
nouveau [ VOLT][0000:01:00.0] GPU voltage: 912500uv
nouveau [ PTHERM][0000:01:00.0] fan management: automatic
nouveau [ CLK][0000:01:00.0] --: core 405 MHz memory 810 MHz
ata8: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
nouveau [ DRM] resuming client object trees...
nouveau [ DRM] resuming display...
ata3: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata1: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
usb 7-2: reset high-speed USB device number 3 using xhci_hcd
nouveau [ DRM] resuming console...
usb 7-1: reset high-speed USB device number 2 using xhci_hcd
usb 7-1.1: reset low-speed USB device number 4 using xhci_hcd
usb 7-1.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
PM: resume of devices complete after 4142.213 msecs
PM: Finishing wakeup.
Restarting tasks ...
pci_bus 0000:06: Allocating resources
pcieport 0000:05:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06-0d] add_size 200000 add_align 100000
pcieport 0000:05:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:05:00.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:05:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pcieport 0000:05:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pcieport 0000:05:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pcieport 0000:05:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
done.
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp12s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp12s0: link is not ready
8021q: adding VLAN 0 to HW filter on device enp12s0
e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
usb 1-13: new full-speed USB device number 4 using xhci_hcd
usb 1-13: New USB device found, idVendor=046d, idProduct=c52b
usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-13: Product: USB Receiver
usb 1-13: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.000E: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-13/input2
input: Logitech MX Master as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.2/0003:046D:C52B.000E/0003:046D:4041.000F/input/input25
logitech-hidpp-device 0003:046D:4041.000F: input,hidraw2: USB HID v1.11 Keyboard [Logitech MX Master] on usb-0000:00:14.0-13:1